To make a straight cut in the acrylic, you will want to use a fine-tooth saw, or a scoring knife. In short, it is best to score the acrylic several times, apply adequate pressure to break the sheet, and support it in the center or both ends to minimize cracking.
Acrylic sheets can be sourced and purchased from most hardware stores, local outlets that sell sheets, and specialized online retailers for building material.
Make sure you proceed cutting without hastily cutting, and also leave the protective film on while cutting to avoid chipping.
Consider high-heat and high-scratch resistant acrylic sheets for backsplashes and cabinet shutters.
The best company for acrylic sheets is Royale Touche for their extra premium decorative acrylic offering with durability and clarity and high-gloss finish.
Clear cast acrylic sheets work great as a durable and smooth surface for acrylic painting.
Yes, acrylic can be bent using heat by using a heat gun or strip heater with controlled heat.
Acrylic sheets are fabricated by polymerizing methyl methacrylate (MMA) both by casting, but mainly extrusion.
Kitchens use a contemporary design with a high gloss acrylic sheet that is stain-resistant for all aesthetic cabinet fronts and wall panel application.
Royale Touche has high gloss, stylish acrylic at a premium for kitchen cabinets.
Acrylic sheets are high-quality surface materials made from PMMA (Polymethyl Methacrylate), widely used as a stylish and durable alternative to glass and conventional decorative surfaces. They are known for their exceptional clarity, high gloss finish, lightweight nature, and excellent resistance to moisture, making them ideal for modern interior and furniture applications.
Acrylic sheets are commonly used in modular kitchens, wardrobes, furniture shutters, wall panels, and commercial interiors, where both aesthetics and performance are essential.
Royale Touche Solid Acrylic represents the premium category of acrylic sheets, offering significantly superior quality compared to regular acrylic sheets available in the market. While standard acrylic sheets may vary in gloss level, color consistency, and durability, Royale Touche Solid Acrylic is engineered to deliver.
Yes, acrylic sheets can be bent and thermoformed using controlled heat. When heated to the required temperature, acrylic becomes flexible and can be shaped into curves or angles without cracking. Once cooled, it retains the new shape with excellent structural stability.
Yes, acrylic sheets are considered lightweight materials, especially when compared to traditional options like glass or stone. Acrylic weighs approximately 50% less than glass of the same thickness, making it easier to handle, transport, and install.
Despite being lightweight, acrylic sheets offer excellent strength, impact resistance, and surface durability, which makes them suitable for both residential and commercial interior applications. Their reduced weight helps lower structural load, minimizes installation effort, and allows greater flexibility in furniture and design applications.
Because of these properties, acrylic sheets are widely used in modular kitchens, wardrobes, furniture shutters, wall panels, partitions, signage, and decorative interiors, where ease of installation and long-term performance are important.
Yes, acrylic sheets are 100% waterproof. They do not absorb water, swell, or warp when exposed to moisture, making them highly suitable for areas where humidity and occasional water contact are common.
Because of their non-porous surface, acrylic sheets resist moisture penetration, staining, and mold growth, helping maintain both appearance and hygiene over time. This makes them an excellent choice for modular kitchens, wardrobes, bathroom vanities, wall panels, and furniture surfaces.
When properly fabricated and installed, acrylic sheets provide long-lasting performance in moisture-prone environments while retaining their finish and structural stability.
Yes, acrylic sheets can be drilled safely when the correct tools and techniques are used.
Key points to know:
Use the right drill bit: Standard HSS (High-Speed Steel) drill bits work well. For best results, bits designed for plastic help reduce cracking.
Low speed drilling: Drill at a slow, steady speed to prevent overheating and melting.
Proper support: Always place the acrylic sheet on a flat, firm surface to avoid vibration and breakage.
Light pressure: Apply gentle, even pressure—do not force the drill.
Pre-marking helps: Mark the drilling point and start with a small pilot hole for accuracy.
Cooling is important: Pause occasionally or use air/water cooling to prevent heat buildup.
When drilled correctly, acrylic sheets maintain their strength and clean finish, making them suitable for furniture fittings, signage, partitions, cabinets, and decorative installations.